Star Gazer Jump Settings (98 CC)

BCMBCM Posts: 148 Baller
I picked up a 98 CC this past winter that already had Star Gazer installed. For slalom it was pretty well dialed in, just had to calibrate the baselines again and it was great. I calibrated the jump baselines as well. I have been trying to get back into jumping and myself and the driver feel like the switch is acting a little funny. Possibly coming on late and/or shutting off early. I understand much of this is controlled by the x8d and x8u settings. Being that I haven't jumped much in about 8 years and I am the only jumper on my lake, we are having a hard time figuring out these settings. I tested the switch and it is functioning properly. I'm currently jumping about 90ft with a single wake cut, 5ft, 35mph. Working my way back to 3/4 cuts.

Does anybody have an idea on starting points for the x8d and x8u settings for a 98 CC with PCM GT40?

The closest guidance I could find was for 05 promo boats, PP recommended x8u=85 and x8d=250, for 5.7l boats.

Are there any other settings (besides RTB/fast second segment and letter) that may alter how the switch acts when jumping less than 120ft?

Comments

  • wskierwskier Posts: 118 Baller
    I have a question where is the gps puck located I have a1999 snob I'm up grading to star gazer from perfect pass pro. Stopped jumping years ago.
    but still ride them for fun good luck.
  • BCMBCM Posts: 148 Baller
    on the front side of the dash, wire comes up between fiberglass and plastic dash piece then velcro holds it just above the joint. Works well on the closed bow.
Sign In or Register to comment.

Not sure how to deal with a long link?