NEW! Radar Carbon Sequence Plate for Vapor boots

HortonHorton Posts: 24,833 Administrator

Support BallOfSpray by supporting the companies that support BallOfSpray

Babes / Barts / Connelly / D3 / DBSkis / Goode / HO Syndicate

MasterCraft / Masterline / O'Brien / Performance Ski and Surf

Reflex / Radar /Stokes

Tagged:
ALPJrvtjcmopowpowalex38

Comments

  • HortonHorton Posts: 24,833 Administrator
    The instructions are here

    Support BallOfSpray by supporting the companies that support BallOfSpray

    Babes / Barts / Connelly / D3 / DBSkis / Goode / HO Syndicate

    MasterCraft / Masterline / O'Brien / Performance Ski and Surf

    Reflex / Radar /Stokes

    ReggieO
  • How much weight difference between the new plate and the old sequence plate?
    - President of the Utah Water Ski Club
    - Owner at Still Water Lake Estates
  • WayneWayne Posts: 405 Baller
    Looks like the same hole pattern as the aluminum Sequence plate, so won't all of the Radar plate bindings work? Didn't know if the Vapors had anything special regarding mounting verses the other offerings.
  • JordanOzJordanOz Posts: 58 Baller
    I'm not 100% sure (I'm hoping really...) but maybe any Radar binding that has an aluminium plate will work. I have a Vapor front boot, and an HRT with aluminium plate, and the sequence plate mount holes look the same as the holes on the aluminium plates. I hope my setup (boot and HRT) will fit onto the sequence plate. Maybe the Profile boot can fit too? @brooks

    I would think any with the feather frame won't work.
  • JGrayJGray Posts: 63 Baller
    I bought one of the new plates and nationals, and mounted up my older (blue) Vapor bindings no problem it is the same mounting locations as the old sequence plate, just different material, and different system to attach to the ski. The plate is awesome. And FYI it does NOT use the collar washers the old plate does.
  • skidawgskidawg Posts: 3,139 Open or 55K Rated Skier
    Looks very nice
    Mr. Mom is Horton's favorite movie!
  • MSMS Posts: 4,554 Mega Baller
    Do they have it for a single boot?
    Shut up and ski
  • Chef23Chef23 Posts: 5,200 Mega Baller
    @MS you can mount a RTP to the Sequence plate.
    Mark Shaffer
  • MSMS Posts: 4,554 Mega Baller
    I am not a fan of the 1 plate system. I like my boots on 2 separate plates. I use Vapor front with a Wiley rear
    Shut up and ski
  • DekeDeke Posts: 340 Baller
    I use Wiley RTP rubber and foot pad directly on the Sequence plate. IOW, I don't use the "plate" of the RTP.
  • brooksbrooks Posts: 160 Open or 55K Rated Skier
    To all wondering, yes, you can mount any Radar boot that mounts to an aluminum plate to the Carbon Sequence Plate. This includes, Vapor, Profile, Vectors, some older Lyrics and Primes and our ARTP and HRT.

    The weight of the Carbon is 1lb .5oz the Aluminum is 1lb 9oz so over a half a pound lighter.

    As of right now we are only offering the sequence but there is a possibility for individual plates in the future.
    schaferscotchipmanjipster43
  • MSMS Posts: 4,554 Mega Baller
    Thanks @brooks
    Shut up and ski
  • markchilcuttmarkchilcutt Posts: 808 Crazy Baller
    I spent some time around a prototype this summer and have to say it is very nice! Planning to pick one up from my local dealer in the spring!
    Ski it if you can!!!!
  • Thanks @Brooks, looks like I need to pick one up it he spring as well to go with the new ski. :)
    - President of the Utah Water Ski Club
    - Owner at Still Water Lake Estates
    brooks
  • Than_BoganThan_Bogan Posts: 5,801 Mega Baller
    Any reason you can't mount other manufacturer's plate bindings to this thing?
    Any reason you can't use this on other manufacturer's ski if they have a standard insert layout?

    It seems like a great solution for easy movement of both boots at once in small increments.
    Nathaniel Bogan -- GUT Padawan
  • DekeDeke Posts: 340 Baller
    @Than_Bogan I have done both with the old Sequence plate so I don't see why you couldn't do it with the new one.
    Than_Bogan
  • ALPJrALPJr Posts: 1,539 Crazy Baller
    Dbl Vap Carb's w/ Sequence on HO
    Than_BoganTFIN
  • ZmanZman Posts: 1,023 Crazy Baller
    @Than_Bogan
    You can mount the Carbon Sequence on most skis. But, with Goode skis with inserts the rear inserts are spaced too close for the Carbon Sequence. At least that is the case with my Nano One and Nano 1XT. The aluminum Sequence has wider slots at the back end of the plate, which provide access to the Goode inserts. The slots are not as wide with the Carbon plate, so the Goode rear inserts are covered. I will need to widen the two inner most slots by about 3/16". And, of course use the Radar spreader piece on top of the plate for strength.
    Definitely a nice feature with the new micro-adjustment, allowing for moving the plate in 1/16" increments (for those who are that dialed in).
    Blood type IPA
Sign In or Register to comment.