Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

______________
12" White Stickers
______________
BallOfSpray $5 Donation
______________
BallOfSpray $10 Donation

Mikro-just bits??

MarkMMarkM Posts: 100 Open or 55K Rated Skier
I have to re-install my mikro-just into a new plate.
Are these the correct bits?

Counter sink: 3/8 82 degree
Drill bit: 1/8


Comments

  • HortonHorton Posts: 25,194 Administrator
    looks right

    Support BallOfSpray by supporting the companies that support BallOfSpray

    Babes / Connelly / D3 / DBSkis / Goode / Hobe Lake / HO Syndicate / KD Skis  

    MasterCraft / Masterline / MOB / O'Brien / Performance Ski and Surf / Reflex / Radar / Stokes

  • MarkMMarkM Posts: 100 Open or 55K Rated Skier
    edited June 8
    Thanks man. Did you confirm the numbers with one that you have? Just want to be certain before I mangle a new plate.
  • HortonHorton Posts: 25,194 Administrator
    No it looks right but I did not actually check

    Support BallOfSpray by supporting the companies that support BallOfSpray

    Babes / Connelly / D3 / DBSkis / Goode / Hobe Lake / HO Syndicate / KD Skis  

    MasterCraft / Masterline / MOB / O'Brien / Performance Ski and Surf / Reflex / Radar / Stokes

  • MarkMMarkM Posts: 100 Open or 55K Rated Skier
    Ok. Just verified that those are the ones. Thanks!
  • skialexskialex Posts: 704 Crazy Baller
    They look right, but you can compare the screw with the drill bit and the size of the screw head with the width of the countersunk bit, don't even need a caliper for this. If they are about the same nothing will go wrong and it is not rocket science. If by chance you make a mistake you can always drill at the other side of the slot or the other side of the plate, you have 4 tries or more if it's a hardshell plate.
    B)
  • skialexskialex Posts: 704 Crazy Baller
    I went to my garage and took a picture of some mikrojust hardware because I couldn't read the letters on the face of the bits. Yes they are right.

Sign In or Register to comment.