Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

______________
12" White Stickers
______________
BallOfSpray $5 Donation
______________
BallOfSpray $10 Donation

Overhead Cable Boat Lift

mkerziemkerzie Posts: 61 Baller
Does anyone have any experience converting a 2-point stern cable lift to a single point? The Nautique 200 has a single lifting ring in the stern and the boat house that I am using is a 2-point for the stern. Any help and or info would be greatly appreciated.
MS

Comments

  • liquid dliquid d Posts: 1,001 Crazy Baller
    spreader bar is probably the quickest
  • skiinxsskiinxs Posts: 460 Crazy Baller
    edited June 13
    Is it an ace lift with a y-cable coming down from the central pipe or are there pulleys making two cables go out from the pipe then straight down? If it has a central pipe, you could remove one of the cables, not use the pulleys and simply lift from the pipe as in the bow.
  • georgea0731georgea0731 Posts: 11 Baller
    sorry for the addition question, but I'm on my 2nd season with a 4 point cable lift, center pipe and it makes a screaming noise when it's going up and down part of the time. What can I do to get rid of the loud noise. Everything was new last year during construction. email: [email protected], TIA
  • liquid dliquid d Posts: 1,001 Crazy Baller
    Grease gun with the right fittings, and grease away! PS...the noise will only get worse.
Sign In or Register to comment.