Onside help

DanoDano Posts: 113 Baller
Hi all,

I'm on 2015 66" vapor. I'm 170lbs. fin is at 2.445, .745, 6.954. boot is 29.25. I'm skiing well with this set up 32off at 34mph. My offside turn feels real good every time. Onside, is not very consistent, sometimes it seems pretty good other times it feels hard to initiate and it feels like the ski nearly stops and i get folded over on hook up (too much tip?) and other times i'm diggin a hole with the tip high and of course thats slow and hard to hang onto. just trying to find some consistency. would a fin move help this? Sorry I don't have any recent video's.

Comments

  • skiepskiep Posts: 293 Solid Baller
    try moving just the rear boot back one hole first. Just the rear!
    DanoLuzz
  • DanoDano Posts: 113 Baller
    Went back one hole with the rear binding. Seems to have been a move in the right direction. Thanks @skiep
  • turbogooseturbogoose Posts: 22 Baller
    I have trouble with my ski coming all the way around on my on-side. Things got a little better when I moved my fin forward.
  • JordanJordan Posts: 1,129 ★★★Triple Panda Award Recipient ★★★
    You could also try the differential fin depth trick to improve your onside...insert one or two washers in between the fin block and the ski at the middle screw.
    If you are RFF put it on the left side, if you are LFF put it on the right.
  • DragoDrago Posts: 1,442 Mega Baller
    Although, @ 2.445, that's going to be around 2.415--super shallow and spin even more
    SR SL Judge & Driver (“a driver who is super late on the wheel and is out of sync”)
    Dano
  • Chef23Chef23 Posts: 5,844 Mega Baller
    I think sometimes with the onside turn it can be technique based. You generally are carrying more speed into your offside turn so the ski tends to initiate and flow through the turn better. Make sure you focus on good effort through the work zone on your offside and good handle control to maintain direction off the wakes.
    Mark Shaffer
    DanoWaterSkier12ballsohard
  • DanoDano Posts: 113 Baller
    Moving the rear boot back was a very good suggestion. I did that and skied it yesterday, results surprised me quite a bit. Onside seemed to be much improved without taking away from the offside. Ran right up to my PB first set. I didn't think 1/4 inch in rear boot placement would render a noticeable change, but I do believe it did. @Chef23 i agree my handle control needs work and direction is never optimal as I scramble from ball to ball. work in progress.
  • C5QuestC5Quest Posts: 225 Baller
    Maybe can’t rear foot slightly. Or the washer under fin block was a substantial change for me. Like almost too much. .030 differential is the sweet spot

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file