Goode Revolution...Crack or not crack?

IronR1IronR1 Posts: 10 Baller
Hi Ballers,

I need your opinion on the photos below, for you it is a crack or just a wrinkle in the paint?

For Goode Customers service it's a wrinkle not splinters or crack...but I didn't see this default before my first set on the ski!



«1

Comments

  • JetsetrJetsetr Posts: 231 Baller
    See if the paint or material will chip off....
  • JASJAS Posts: 242 Solid Baller
    No crack, looks like surface finishing blemish
    TheBigHead
  • APBAPB Posts: 209 Baller
    crack. looks like it more towards the tail. impact possibly.
  • IronR1IronR1 Posts: 10 Baller
    @eleeski IMO when you bought a ski 2000$ you don't want to have a cosmetic blemish on your ski. It's also a problem to sell it the day you want to change it.

    But again the MAJOR problem for me is that the ski had nothing before the first set, I spent enough time to adjust the fin before to be sure.
    RednucleusReggieOHydro1980
  • IronR1IronR1 Posts: 10 Baller
    @APB for Goode no impact...
  • Keith MenardKeith Menard Posts: 498 Crazy Baller
    I would say it is a blemish...until you look at the last picture...it looks like something hit the bottom.
    MSRednucleus
  • wawaskrwawaskr Posts: 190 Baller
    Nothing to worry about - Goode will refinish it for you. What are your thoughts about skiing on the Revolution?
    Matt
  • skihartskihart Posts: 478 Solid Baller
    If I spent that kind of money I would want a new one.
    Bill22
  • ski6jonesski6jones Posts: 908 Crazy Baller
    What do you want for $2100 anyway! (kidding)
    Carl Addington, Lakes of Katy, Texas
    MSjayskiballsohardskidawg
  • skialexskialex Posts: 830 Crazy Baller
    Most Goodes have imperfections like this, they are sprayed finished by hand, no fancy vinyl wrap. Every time I buy a new one think of this $2000 for a ski with imperfections but they ski damn good!
    TheBigHeadballsohardbishop8950
  • IronR1IronR1 Posts: 10 Baller
    @skialex I like these skis! I had several Goode before that one: 9600, 9800, Nano One XT, XTR, I have never seen before that on any of these skis. As it happened after a set, I'm afraid it's a structural problem, not only cosmetic.
    Wish
  • TheBigHeadTheBigHead Posts: 38 Baller
    Nah, ive seen similar on Goodes before in that same spot.

    Nothing to worry about in regards to structure IMO.

    Goodes aren't pretty skis, i think its just something you have to accept with Goode.
    ballsohardskialexbishop8950
  • skialexskialex Posts: 830 Crazy Baller
    @IronR1 I had most models after 9500 and have seen this before, just cosmetic to my opinion. I wouldn’t worry about structure. I would ski it and if starts developing to a crack I would then send it back and ask for a new one, not repaired one. Not for a $2000 ski. Personally if it was my ski I wouldn’t worry about a sudden failure, not only there is enough material around the tail but the fin box also holds it together.
  • jimskijimski Posts: 336 Baller
    They do crack
    TheBigHeadWishWaterSkier12
  • liquid dliquid d Posts: 1,074 Mega Baller
    a little bigger crack right there...nothing a little duct tape and JBweld can't fix.
    jayskiskialex
  • aupatkingaupatking Posts: 1,180 Mega Baller
    edited May 2
    Goode luck getting them to fix it
    jimskiTheBigHeadWaterSkier12
  • DragoDrago Posts: 1,442 Mega Baller
    You should return the ski so they can repaint it
    SR SL Judge & Driver (“a driver who is super late on the wheel and is out of sync”)
    aupatkingjimskijayskiTheBigHeadBill22
  • IronR1IronR1 Posts: 10 Baller
    @jimski same issue with my 9600.
    @Ipskier, not a problem of DFT, it was a Whisperfin, and DFT done with a caliper. Maybe not a good idea to try the ski directly with this fin but that's another problem!
    @Drago ski sent back to Goode who will repaint it, we'll see if it starts again...I hope not, shipping between Europe and USA is expensive ... and for me!!!
  • lpskierlpskier Posts: 2,444 Mega Baller
    @IronR1 As is often the case, my comment was sarcastic humor.
    John Wilkins- Si non pro sanguine quem ludus ne. #iskiconnelly
    WaterSkier12
  • DragoDrago Posts: 1,442 Mega Baller
    @IronR1 As was mine
    SR SL Judge & Driver (“a driver who is super late on the wheel and is out of sync”)
  • OldboyIIOldboyII Posts: 561 Solid Baller
    I had similar "imperfections" on the tip of my XT. Couple of weeks later tip of the ski fell apart.
  • Jody_SealJody_Seal Posts: 2,608 Mega Baller
    Looks to me like a blemish or even a factory repair of a blemish. Either way I would assume that the manufacturer would replace it if it was new and the buyer was dissatisfied with the product.
    Skis crack, skis break but I dont think that this imperfection will cause any issues. Might want to take a little 400 grit sand paper and smooth it out if you wind up keeping it. Who knows it could be the magic ski!!
    Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.


  • MSMS Posts: 5,104 Mega Baller
    I had a N1 that had the front holes off set to the left a bit. Best N1 of the 3 I skied on
    Shut up and ski
    customskiskialex
  • eyepeelereyepeeler Posts: 160 Baller
    Just sand it down and respray with SEM Bumper Coater if there is no defect.
    Matt Dillon
  • richfosterrichfoster Posts: 50 Baller
    Looks like a crack and if I paid over 2100 to get that to my door I wouldn't be happy. jmo
  • skierjpskierjp Posts: 692 Crazy Baller
    Looks like a crack to me when you zoom in. Shoot, Performance replaced a Radar for me with a blem on the top of the ski. They had to get the replacement from the factory and had it drop shipped to my house. The problem you will have is trying to sell it to the next owner!
    aupatkingschafer
  • liquid dliquid d Posts: 1,074 Mega Baller
    Never return a ski without trying it first....
    skialexTheBigHead
  • LeonLLeonL Posts: 2,305 Crazy Baller
    @IronR1 did I read that you installed a Whisperfin? Don't let Goode know, they'll probably say that voided the warranty.
    Leon Leonard Stillwater Lake KY - SR Driver SR Judge
    jayskiski6jonesaupatkingTheBigHead
Sign In or Register to comment.