Mastercrafts from the late 80S. love them or hate them?

kcrosskcross Posts: 16 Baller
I ski behind my friends 95 prostar 205 a couple times a week and love it, but I would really like to get my own boat next year on a budget. My cousin has a 1988 prostar 190 that I can snag for $6000 will I notice a big change in the boat? I guess I am looking for peoples blessing on not going with the 91-95 to avoid getting into that $9000 and up price tags that come along with them. Do I have to run magnets for speed control on a boat that old too I guess is my other question? thanks any input appreciated.


  • BraceMakerBraceMaker Posts: 3,190 Mega Baller
    Still have one as a back up boat ;)
  • animalanimal Posts: 89 Baller
    You could add perfect pass to that boat. If you want timing, magnets would be necessary, but are not necessary to operate the speed control.
  • UWSkierUWSkier Posts: 962 Mega Baller
    You should be able to install Stargazer 3-event into a 1988 MC. Linkage works with a carb setup just the same. You won't need magnets with that setup.
  • lcarneslcarnes Posts: 114 Solid Baller
    I skied behind our 1988 Mastercraft for years and LOVED it. Evidently, it had a bad spray for shortline skiers - but that was never a worry for me :smile:
  • jhughesjhughes Posts: 847 Mega Baller
    Having owned an '83 MC as well as a fleet worth of newer ski boats I have to say there will be a significant difference with the '88 vs. something newer. I.e. the incremental dollars between that and a more modern boat (even early 90's) will be worth every dime. That 80's MC hull is a very small boat that tracks like a bar of soap and has a lot of spray compared to modern boats. Wake is actually good for the time period but the rest, forget it. The ergonomics are odd throughout the boat as it feels like the whole thing is designed for a 7/8ths scale human. Additionally the "fighter plane" windows of the 87-90 are not too functional and the windshield is really low. I'd save another 3-4K and buy something from the 90's.

  • BraceMakerBraceMaker Posts: 3,190 Mega Baller
    edited August 2017
    RPM mode is "dumb" it has no clue how fast the boat is going, so you have to tell it how many RPM to go - if you're just casually skiing the course just fire up a phone GPS application and stick that in the cup holder and pull a skier at whatever RPM say 3100, watch and if it says 28 mph average as you drive you are going roughly that fast, next pass adjust a few ticks up or down based on the skier preference - be prepared for a bit of a shock when you enter a tournament with a modern boat and ZO and say you want a 28 - it will be loads different.

    PP can be informed of speed through a paddlewheel pick up, magnets, or GPS - GPS can come from a third party GPS unit that "fools" the PP into thinking it is reading a paddlewheel, or you can buy a stargazer unit.

    Slower speed stuff will become the problem, rec slalom is great on rpm or gps modes, but if you don't have a speed sender you can't use the Trick mode and if you set really low speeds in RPM mode the boat can drop off plane going 1400 rpm and be going 2 mph or get up to speed and go a bit faster.
  • bigskieridahobigskieridaho Posts: 915 Crazy Baller
    Yep those boats are great! Get yourself stargazer and throw a zbox in and you will be tournament ready!
  • WindsurfnutWindsurfnut Posts: 51 Baller
    Love our '89. Newer boats are much better in so many ways. But for $6000 you're running a flat wake. Adding Stargazer and you have GPS speed control. There are shortcomings versus newer boats (tracking, size, fit and finish) but at the end of the day you are skiing.
    They are sensitive to weight, make sure you have a spotter of similar weight as the driver or through in a bag of sand etc. If not the wake can be a bit sharp on the unweighted side.
    All said, we just keep using and enjoying ours for the skiing, and pull out the Baja when the tubers come out...
  • swc5150swc5150 Posts: 2,158 ★★★Triple Panda Award Recipient ★★★
    We had an '88 back when it was new and loved the boat. I was a sophomore in high school, so my size scaled the boat nicely:) It's small with plenty of shortline spray, but a flat wake and an absolute blast to drive. I mean drive, not track with a 200lb+ dude in tow getting into -35. @jhughes does sum it up accurately. BUT, if I found a mint '88, I'd pay $6k today to have one again. Such a fun little boat.
    Scott Calderwood
  • kcrosskcross Posts: 16 Baller
    awesome everyone I appreciate the all the input.
  • AndreAndre Posts: 1,029 Crazy Baller
    It was good enough for Mapple,LaPoint brothers,Roberge,Duvall,Lowe...
    Should be good enough for all of us!
  • BraceMakerBraceMaker Posts: 3,190 Mega Baller
    With all the talk about tournament boats and the price of the sport it'd be good fun to have a retro boat grassroots fun tourney. Nothing newer than 89, I'm sure the trickers would have a blast.

    There's something great about dragging the '88 out and going to the sandbar with a boat load of people and skiing people off the sand.
  • WoodySkierWoodySkier Posts: 79 Baller
    They were cool looking boats, especially if they are in great shape. If you're driving them through the course it will be an adventure because they do not track well. They are really small as well so if you have a few people it will be tight. They do have a nice wake.
  • Mike GileMike Gile Posts: 294 Crazy Baller
    Great entry boat! I had an 89 for 22 years and almost 3000 hrs.

    Not as easy to drive as todays boats, and a bit of chime spray, but skis well.

    I kinda miss her.......
  • swc5150swc5150 Posts: 2,158 ★★★Triple Panda Award Recipient ★★★
    We still have an '86 MC at home. So fun to drive!

    The world record in '86 was no where near where it is today, so maybe it wasn't quite driving those pros as we'd think? Not for Jack Walker anyway:)
    Scott Calderwood
  • HortonHorton Posts: 26,538 Administrator
    I miss my 91

    Support BallOfSpray by supporting the companies that support BallOfSpray

    Barts ★ Connelly ★ D3 ★ DBSkis ★ Fin Whisper ★ Goode ★ Hobe Lake ★ HO Syndicate 

    MasterCraft ★ Masterline ★ MOB ★ Performance Ski and Surf ★ Reflex ★ Radar ★ Stokes

  • 6balls6balls Posts: 4,956 ★★★Triple Panda Award Recipient ★★★
    Killer wake, better than the 205. Spray at short-line. My buddy has an '87 for sale in excellent shape with perfect pass for $6K. It's a lot of boat for $6K.
    Dave Ross--die cancer die
  • FWinterFWinter Posts: 112 Open or 55K Rated Skier
    @Horton That Bumblebee not doing it for you? :wink:
  • MISkierMISkier Posts: 2,386 Mega Baller
    @Jaypro, that is a beautiful boat. What did you use for the oxidation? Compound, wet sanding, or something else?

    Excellent restoration job and a great boat on a budget.
    The worst slalom equipment I own is between my ears.
  • sunvalleylawsunvalleylaw Posts: 1,259 Mega Baller
    edited September 2017
    Question, what year did MC stop using wood stringers? And also, I always had a soft sport for the stars and bars look. When did that go away?
  • 6balls6balls Posts: 4,956 ★★★Triple Panda Award Recipient ★★★
    My buddies 87 has no wood
    Dave Ross--die cancer die
  • MISkierMISkier Posts: 2,386 Mega Baller
    I thought that 83 was the end of the wood in the stringers.
    The worst slalom equipment I own is between my ears.
  • JayproJaypro Posts: 224 Solid Baller
    @MISkier I did a lot of reading on the Mastercraft forum! I wet sanded the boat, then bought a pro buffer and used 3M's rubbing compounds from aggressive to fine. I then polished it and waxed several times. I also replaced the rub rail, that made a huge difference. As did the new decals. I then sanded down the teak platform, cleaned it and oiled it. Labor of love! I couldn't ski the year I bought it as I was recovering from shoulder surgery, so it was fun and good therapy!! If you want the exact list of what I used I will get it for you.
  • BraceMakerBraceMaker Posts: 3,190 Mega Baller
    @6balls - Hell of a lot of boat at 6k if the trailer works! Takes 6-10 for these.

    Wood stringers done by 83 some wood in back floors etc.
  • 6balls6balls Posts: 4,956 ★★★Triple Panda Award Recipient ★★★
    @BraceMaker true and trailer is very nice...someone gonna get a bargain
    Dave Ross--die cancer die
  • MISkierMISkier Posts: 2,386 Mega Baller
    @jaypro, I would like the list. My Dad's I/O is in need of some serious attention. Thanks.
    The worst slalom equipment I own is between my ears.
  • JayproJaypro Posts: 224 Solid Baller
    @MISkier I started with 600 grit sandpaper ad a rubber sanding block. Keep a bucket of water handy and do 2' square sections at a time. Don't skimp om a good buffer, they are a not a lot of money and you will have it the rest of your life. I bought a Makitia 9237c with a 3 pack of buffing pads (heavy light and medium) for less than 200$ on Amazon. After wet sanding start with 3M Super Duty Rubbing compound, then 3M Marine Compound and finishing Material, and lastly 3M Color/Gloss Restorer. For wax everyone has a favorite, I like 3M Marine Ultra Performance Paste Wax. After I finished I could see my reflection in the gelcoat. If you want any tips or have questions PM me. Happy to help!
  • MISkierMISkier Posts: 2,386 Mega Baller
    Thanks @Jaypro. I like the 3M products as well. For light maintenance, I used the 3M Marine Cleaner and Wax, which has a very light compound. For overall wax, I use Meguiars Flagship wax.
    The worst slalom equipment I own is between my ears.
Sign In or Register to comment.