Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

______________
12" White Stickers
______________
BallOfSpray $5 Donation
______________
BallOfSpray $10 Donation

Engine cover insulation coming unglued

NEONEO Posts: 5 Baller
Anyone know of a good product for attaching the insulation that is starting to come undone on inside of boat engine cover. Would like to find a spray adhesive that is resistant to high tempatures. I see auto parts stores sell spray adhesive for roof liners in the interior but can they withstand the heat?

Comments

  • LeonLLeonL Posts: 2,255 Crazy Baller
    Probably not. That's what was most likely on there from the start. You can get brush on contact cement that is better for your application, as you eliminate any overspray. 3M used to market weatherstripping adhesive in a tube that may work well for you. Yellow stuff.
    Leon Leonard Stillwater Lake KY - SR Driver SR Judge
  • gregygregy Posts: 2,456 Mega Baller
    The brush on contact cement should work but make sure to clean the surface really good and follow the directions. You may need to rough up the fiberglass surface with some sandpaper. At least 2 coats on both surface and let it dry between coats.
  • DWDW Posts: 1,850 Mega Baller
    3M 90 spray adhesive is pretty good stuff, good to 250 F according to data sheet. Try it on a small piece first as it can/will melt some materials.
Sign In or Register to comment.