Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

12" White Stickers
BallOfSpray $5 Donation
BallOfSpray $10 Donation

CG Denali Wing Angle

tjones999tjones999 Posts: 6 Baller
I just want to know the angle people use on the CG Denali wing. I get the impression most are using 4-6 degrees but I woulkd love it if people just replied to this with their preferred angle or range they use.


  • thagerthager Posts: 4,573 Mega Baller
    I ran 5 degrees on my C-65. Any more than that and It felt like dragging an anchor!
    Stir vigorously then leave!
  • HortonHorton Posts: 27,762 Administrator

    Support BallOfSpray by supporting the companies that support BallOfSpray

    Barts ★ Connelly ★  DBSkis ★ Goode ★ Hobe Lake ★ HO Syndicate 

    MasterCraft ★ Masterline ★ Performance Ski and Surf ★ Reflex ★ Radar ★ Stokes

  • Ed_JohnsonEd_Johnson Posts: 2,117
    edited July 7
    5 degrees...Over that was pure drag !!

    Note: If you are using the S Wing, you may get away with up to 8 degrees. Those using a std. wing seem to be limited to 5 degrees max, or there is added drag.

    Special Thanks to Performance Ski and Surf and the Denali Adam's !!!
  • customskicustomski Posts: 87 Baller
    7-8 degrees for me
  • Alberto SoaresAlberto Soares Posts: 308 Solid Baller
    9 on XTR
  • BlueSkiBlueSki Posts: 681 Crazy Baller
    8 on the Denali fin mounted on a Vapor. Previously ran 9 with the stock fin. Tried 7, didn’t bleed the speed quite enough.
  • VONMANVONMAN Posts: 111 Baller
    8 degrees
    Ernie Schlager

    A Good One Ball Gives You Six
  • JibboJibbo Posts: 133 Water Ski Industry Professional
    edited July 7
    7°, which is what Denali recommend I believe
  • lpskierlpskier Posts: 2,561 Mega Baller
    edited July 7
    I run 7.5 degrees using a Denali S wing on a 68 Mapple T3. Same angle with a standard flat wing. If your question pertains solely to use on a Denali ski, sorry for going off topic.
    John Wilkins- Si non pro sanguine quem ludus ne. #iskiconnelly
Sign In or Register to comment.