BallOfSpray Water Ski Forum
It looks like you're new here. If you want to get involved, click one of these buttons!
Technique & Theory
Skis Fins Bindings
Videos, Photos & Media
News & Other Stuff
Trick and Jump
Stuff For Sale
Site Info & Instructions
12" White Stickers
BallOfSpray $5 Donation
BallOfSpray $10 Donation
Jump switch on 196 with ZO
Trick and Jump
Looking to find the connection for the jump switch on our 09 196 but cannot locate it. Do we need an extension harness or is there generally one already attached?
I believe you plug the jump cable into the head unit. However I forget which port. I remember there was confusion on that when it first came out. Best to ask ZO guys. Unfortunately Nautique did not put jump cables as standard equipment back then
Dave Island- Princeton Lakes
disland is probably right because he owns an 09, but I would look very carefully in the bundle of wires zip tied together in front of the tow bar. It may be there but hard to see.
You will need an extension harness. I dont think the harness were wired in til the 200's.
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.
A picture of a wiring harness. The black plug is the jump switch. The extension harness plugs into the black plug and has the white small plug at the other end that connects to the switch.
Any source for the plug (or a Mouser part number?)? AutoZone sells the white plugs for rewiring the switch but I haven't found the black plug. My old harness got corroded and lost.
Where does one source out new plugs for these or parts?
Life's about working hard and then having fun on the water!
I am - are you?
Powered by Vanilla