Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

______________
12" White Stickers
______________
BallOfSpray $5 Donation
______________
BallOfSpray $10 Donation

Radar Pulse boot. Replace Profile boot?

gsm_petergsm_peter Posts: 770 Crazy Baller
Any experience of the New Radar Pulse boots?
I have heared that they are a bit lower compared to the Profiles.
I am affraid thery are more narrow?

Life is too short not to enjoy every day!

Comments

  • ColeGiacopuzziColeGiacopuzzi Posts: 441 Open or 55K Rated Skier
    edited September 2019
    @gsm_peter The new pulse boots are rad! I enjoyed getting to ski in them back in March. They did replace the profiles for 2020, but I think they're a step up in terms of performance and level of comfort. I wouldn't say they're lower in height.
    gsm_peter
  • dvskierdvskier Posts: 543 Crazy Baller
    @ColeGiacopuzzi How about width as opposed to the Profile boot?
    gsm_peter
  • ColeGiacopuzziColeGiacopuzzi Posts: 441 Open or 55K Rated Skier
    edited September 2019
    @dvskier the Pulse boot is built on the same chassis as the profile was, so you get the same wider width the profile has than the vapor. It’s more comfortable with a removable intuition liner.
    gsm_peterZman
  • APBAPB Posts: 274 Solid Baller
    The replacement.... def a step up in performance. Removable intuition liners as well.
    Zman
  • gsm_petergsm_peter Posts: 770 Crazy Baller
    Great info. Thanks.
    Just ordered new Pulse boots.

    I hope the Pulse will expand like the Profiles.
    My Profiles have given quite a bit.
    My feets seems to have inherrit some geens from Donald Duck. Wide and flat. Tried Vapors but the Vapors are too narrow even without liners...
    Life is too short not to enjoy every day!
    ColeGiacopuzzi
  • wettek69wettek69 Posts: 86 Baller
    edited December 2019
    Is molding the liners necessary, and does it make that much of a difference? Sorry, never used a boot with a liner before. My old Profile is dying, so looking at going with the Pulse.
  • gsm_petergsm_peter Posts: 770 Crazy Baller
    I Only got one odd set with them before we had to pull the course and the boat.
    The where great. Much firmer feel for 'canting'

    Simple method:
    You can heat mild using warm water in the boots.
    A bit warmer than a really hot shower.
    Fill the boats twice and then wait for 5 minutes.
    Put in your feet and tight the binding.
    Wait for 5 minutes and you are ready.
    Repete if neccesary.
    Life is too short not to enjoy every day!
    KRoundyslowskialex
  • wettek69wettek69 Posts: 86 Baller
    @gsm_peter Thanks mate. My local ski shop reckons they ski great straight out of the box, but did say heat moulding them will make them even more comfortable. Sounds like they are a good boot.
Sign In or Register to comment.