Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

12" White Stickers
BallOfSpray $5 Donation
BallOfSpray $10 Donation

Reflex settings help


I need to slide my new front reflex binding 3mm back.
I have to use the back holes of the reflex G10 plate with the back inserts of the front binding, and there is a 6mm gap between each hole. I must cut the holes with a dremel to join them ?
This must be a very common problem no ?




  • BraceMakerBraceMaker Posts: 4,136 Mega Baller
    Pretty common issue really. Between brands and models of ski there is not a standard for the location of the holes.

    For instance if a ski company recommends 29.5" front binding you would think the inserts would be say 29" from tail of ski. But that measurement doesn't exist.

  • skialexskialex Posts: 1,006 Crazy Baller
    You mean that you need to move half a hole and you can not right? Buy and install a mikro-just.
  • FOB69FOB69 Posts: 10
    I don’t see how a micro adjust would solve the problem. I won’t slide anything with discret holes at the rear.
Sign In or Register to comment.