Help Zero Off Upgrade

arturonelsonarturonelson Posts: 4 New Baller
Hello we have a 2011 Ski Nautique 200 and we are having problems with the antenas of the Zero Off. I have email and call zero off several times. Because we will like to upgrade to a single antena and the new software. Any idea how we can do this. Thanks
Tagged:

Comments

  • skier2788skier2788 Posts: 810 Crazy Baller
    @arturonelson it is fairly easy upgrade. Take an old puck off and drill the hole bigger i usually go around an inch hole if I remember correctly. Plug the new puck in and update software. You will need the ZO ecom cable to do the software. I just ordered a single puck and the software. Expected ship date for the puck is 8/23.....
    Travis Torley
    arturonelsonBlueSki
  • BlueSkiBlueSki Posts: 931 Mega Baller
    Freddy Krueger did two installation videos:

    https://youtu.be/JuER3DoPOtk

    https://youtu.be/DsPfK0STKF8
    skier2788Alberto Soares
  • LK_skierLK_skier Posts: 82 Baller
    Are there any issues with the 5.7s response to the single puck upgrade? I heard it’s not optimal?
  • BlueSkiBlueSki Posts: 931 Mega Baller
    It worked well with my 5.7, I really like the pull. Maybe there is an improvement, I seemed to think so at the time, but definitely not a downgrade on my boat.
    LK_skier
  • LK_skierLK_skier Posts: 82 Baller
    What year is yours @BlueSki ?
  • BlueSkiBlueSki Posts: 931 Mega Baller
    @LK_skier it is a 2012 SN 200. I’m glad that I did it. I followed Freddy’s videos when I did mine, which helped a ton.
  • ETskierETskier Posts: 81 Baller
    Do it. I recently switched to single puck on on my SN 196. Quicker response, but smoother and more progressive. Used to be a C1 skier, and now a B2. I'm much more in sinc with the boat. The change to the newer more powerful boats is not as noticeable.
    LK_skierBlueSkiski6jones
  • rockdogrockdog Posts: 664 Crazy Baller
    5.7 @ETskier ?
  • ETskierETskier Posts: 81 Baller
    Yes. 2006 converted to ZO in 07. Best ski tractor around.
    ski6jones
  • BlueSkiBlueSki Posts: 931 Mega Baller
    @ETskier described the change well. Agree, do the upgrade.
  • Alberto SoaresAlberto Soares Posts: 365 Solid Baller
    @FreddyKrueger - congratulations, the best tutorial video I have ever seen on YouTube
    BlueSki
  • AliAli Posts: 226 Baller
    2011 upgrade is generally not that easy. Other than a few select boats it is not plug and play. You will probably need to splice. Skip Dunlap is who you need to talk to. He knows more about nautiques than nautique. Pull is great once you get it done.
  • JohnNJohnN Posts: 132 Baller
    I just went through this on a 15 200 and have a few lessons learned. First, connect your computer to the diag port and make sure you have communication before you start anything - this will give you a baseline and verify your computer setup while you can still ski. Second, it sounds like there were a few revisions of the ZO harness so the plugs you actually use may differ from the video. Third, take the time to really look at your harness and understand the ZO connections before you start. Once I unbundled the harness and was able to see it all it made sense and was easy, but not the same as the video. I did use a 1" bit on the deck, taped it and used a new bit just to be sure but that part was easy. Finally, if you have trouble, don't hesitate to cut the zip tie and spread the ZO harness out so you can see what's going on. Came up with 17-20 satellites compared to the previous 7-8 satellites and I'm assuming no more issue with occasionally not finding any.
  • DougDoug Posts: 49 Baller
    You can me your head unit I will flash it on my bench. I do have some ECI antenna's in stock
  • moveemanmoveeman Posts: 1
    2011 Nautique 200CB - can't seem to complete the upgrade due to not finding obvious proper matching connectors to the antenna pig tail underneath the driver side bow. A previous poster mentioned "Skip Dunlap". Does anyone have any contact info for Skip? Desperate ski club trying to upgrade ASAP!
  • AliAli Posts: 226 Baller
    @moveeman sent you a PM with Skip's number, You will probably need to splice. Other than a select few 2011 200s which were pre-wired plug and play the rest were not.
  • LeonLLeonL Posts: 2,619 Crazy Baller
    edited August 3
    I can't see the first video done by Freddy, listed above. Says "about:blank#blocked"
    Leon Leonard Stillwater Lake KY - SR Driver SR Judge
  • BlueSkiBlueSki Posts: 931 Mega Baller
    @LeonL hopefully this link to Freddy’s page works. https://m.youtube.com/channel/UCbXjWoIBPbOdFY_aQwsgTzg
  • LeonLLeonL Posts: 2,619 Crazy Baller
    bump
    Leon Leonard Stillwater Lake KY - SR Driver SR Judge
  • LeonLLeonL Posts: 2,619 Crazy Baller
    edited September 3
    Just completed my upgrade to ECI puck and RevS, (2008 SN 196) with all of the technical stuff done by @acmx. (Read: I drilled the hole, LOL) Freddy's video is OK, but as he alludes, not exactly applicable to SN.
    Leon Leonard Stillwater Lake KY - SR Driver SR Judge
Sign In or Register to comment.