Home› Mostly Slalom› Skis Fins Bindings

Glue my RTP

dislanddisland Posts: 1,522 Mega Baller
in Skis Fins Bindings
Anyone have a glue recomndation, I tried double sided waterproof tape, no joy
Dave Island- Princeton Lakes

Comments

  • teammalibuteammalibu Posts: 1,213 Mega Baller
    Aqua seal
    Mike Erb Cedar Ridge Canton Miss.
    Horton is my hero
  • teammalibuteammalibu Posts: 1,213 Mega Baller
    Amazon.com
    Mike Erb Cedar Ridge Canton Miss.
    Horton is my hero
  • skibrainskibrain Posts: 269 Crazy Baller
    Shoe Goo.

    I like carb cleaner for making sure surfaces are clean to get a good bond (helpful for any type of glue)
  • marknmarkn Posts: 529 Mega Baller
    E6000 adhesive.
    Wish
  • skialexskialex Posts: 1,352 Mega Baller
    Contact Adhesive works well, apply on both sides, but don’t press them together until is almost dry, something like after 20 minutes.
    braindamagemac
  • mike_mapplemike_mapple Posts: 272 Water Ski Industry Professional
    heat up and remove the extra that is one there first, gorilla glue
    Perfski.com
    407-859-7544
    [email protected]
    [email protected]

    If you have a blister, pop it, pour some lemon juice on it, and then add salt. -Andy Mapple
    Jordan
  • RednucleusRednucleus Posts: 819 Mega Baller
    I like Gear Aid Seam Grip. Similar to aqua seal, less expensive, available in 8 oz tubes. Lasts forever stored in the freezer. You will find lots of uses for it once you have it.
  • jgills88jgills88 Posts: 142 Baller
    I used normal superglue that you can find in a hardware store for this exact problem with my RTP two years ago. Use a lot, and clamp it down while it dries.
    Akron Waterski -- Always looking for water
  • dave2balldave2ball Posts: 1,073 Crazy Baller
    It used to be called get GE Rubber seal. it’s a silicone. Used to glue my binding plates down. Worked great until i needed to take the off. Cheap also
  • wawaskrwawaskr Posts: 383 Crazy Baller
    Spray Adhesive (3M or Loctite)
    Matt
  • swbcaswbca Posts: 737 Crazy Baller
    I have used this stuff for years on skis, mounting hard drives, and most everything household. Press it together over-night. I go through a few tubes every year.

    Hardware stores have it, and it comes in about 8 different versions . . but I am pretty sure its all the same.





    Home of the world's first submersible slalom course
  • Ski_DadSki_Dad Posts: 507 Baller
    agree with shoe goo. it works really well.
  • scuppersscuppers Posts: 572 Crazy Baller
    3M 5200 @ west marine 12.99 Better than anything period
    Chuck Link, Deland Florida
    thagerKKelly
  • BraceMakerBraceMaker Posts: 5,134 Mega Baller
    https://www.amazon.com/Barge-All-Purpose-Cement-O22721/dp/B0032YYOFS
    MitchellM
  • harrison_343harrison_343 Posts: 41 Baller
    tech screws
  • dislanddisland Posts: 1,522 Mega Baller
    edited March 7
    Thanks everyone, I used shoe goo, handy purchase at Lowes. First set today and so far so good. I will report if it lasts
    Dave Island- Princeton Lakes
Sign In or Register to comment.