Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

______________
12" White Stickers
______________
BallOfSpray $5 Donation
______________
BallOfSpray $10 Donation

Shorestation boat lift canopy

acmxacmx Posts: 238 Baller
Need to replace the cover on my Shorestation boat lift canopy. Wondering if anyone has any connections that can get a better price, I think their about $900-$1000. I've kicked around the idea of putting a permanent roof on the existing frame, but not sure if that's a good idea even if I anchor it down when my boat's not on it in the winter. If anyone has seen a permant roof on one I'd like to hear about it.
Thanks

Comments

  • fu_manfu_man Posts: 415 Crazy Baller
    Of course depends on size and material but check iboats.com. 22'x108" canopy cover is $600-800.
  • 34mph34mph Posts: 185 Baller
    You could also get it shrink wrapped like a boat . I went a diff route I had mine custom made , with longer sides all the way around, so never have to cover the boat . A custom boat canvas shop should be able to do it , however not cheap at all
    RichardDoane
  • mlangemlange Posts: 179 Baller
    Got mine from Syntex and after three years it's still like new. When I do need to replace mine I'll be buying from them again.

    http://www.syntexindustries.com/product/Boat_Lift_Canopies.php

    Mike
  • DWDW Posts: 2,010 Mega Baller
    I would search for a local canvas shop, I have had good luck with some small shops doing custom covers at a (much) better price than commercially available. They have used the old one as a pattern and can add some custom touches per your input. Timing can be a big key also for turnaround and pricing.
  • jstaab3jstaab3 Posts: 34 Baller
    you can put a metal roof on the top of your lift for way less money, and than if you want you can add some side curtains from a local tarp shop I will send you a picture of what I did if you like let me know or call if you have questions 785-623-3750

    jason
    Jason Staab
  • acmxacmx Posts: 238 Baller
    @jstaab3 , would like to see some pics of what you did. Post them here or pm me, which ever you prefer.
    Thanks
  • jstaab3jstaab3 Posts: 34 Baller


    Jason Staab
  • foxriveratfoxriverat Posts: 521 Crazy Baller
    2000 Malibu Response LX 2016 66 lithium vapor
    phauswirth
  • fu_manfu_man Posts: 415 Crazy Baller
    @jstaab3 I am really intrigued by your project. Maybe others are too. Looks like metal roofing material from home depot. I would imagine the roof will hold up way better and longer than any material/vinyl cover. Wouldn't have to remove it for the winter either...just the skirt.

    Were you able to order pieces long enough for the length of the canopy (20-22ft) or did you have to piece it together? Pipe straps to bolt sheet metal to canopy ribs? Looks like grommets in the tarp...pull strapped to the perimeter of the canopy? Whatever info you can provide.
  • jstaab3jstaab3 Posts: 34 Baller
    yes the metal roofing from home depot would work, my roof has been on there since I put it on in 2004 the wind and storms we get in Kansas has never bothered it, I used sheet metal screws that have a rubber gasket to seal from water so the roof would not leak and I screwed the roof to the frame/cross pieces that the old canopy would rest on. the side curtains I used a sheet metal screw with some washers to hold tight against the frame. The roofing I used was a solid sheet no cutting required they will overlap a couple ribs, and the lengths I don't remember either 22 or 24 feet I can measure and let you know. I took my side curtains off got tired of messing with them when wiping and putting boat away. the side curtains I bought at upholstery shop cant remember the name of the material but I can find out as well it was really good material and will not tear or rip

    Jason Staab
  • mopowpowmopowpow Posts: 318 Baller
    @acmx, we've used Shorestation lifts for years, the local marina sold lift covers from Shoreline. They were just as nice as the Shorestation, but cost less.
Sign In or Register to comment.