Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

12" White Stickers
BallOfSpray $5 Donation
BallOfSpray $10 Donation

2012 A2 fin settings

SpeshSpesh Posts: 93 Baller
Does anybody have the stock fin settings for the 2012 A2, or a link where I can get them? I can't seem to find the figures that I need anywhere.



  • I ran 2.496 deep, 6.89 long, .75 DFT, 9.5 degrees
    Am I a jumper that wants to be a slalom skier? Or a slalom skier that wants to be a jumper?
  • DirtDirt Posts: 1,629 Open or 55K Rated Skier
    Not sure about stock but these work well for me:
    67" 29.5 binding
    7.5 degree
    I learned everything I know not to do from Horton
  • HortonHorton Posts: 29,139 Administrator
    @Spesh you can trust @Dirt for these fin #s. Not much else.


    Support BallOfSpray by supporting the companies that support BallOfSpray

    Connelly  ★ Basta ★ DBSkis ★ Denali ★ Goode ★ Hobe Lake ★ HO Syndicate ★ MasterCraft

    Masterline ★ McClintock's ★ Performance Ski and Surf ★ Reflex ★ Radar 

    Stella Blue ★ Stokes ★ World WaterSki League


  • SpeshSpesh Posts: 93 Baller
    Ok thanks a lot guys I will go with Dirts numbers and see where I am.
  • bigtex2011bigtex2011 Posts: 504 Crazy Baller
    @spesh i ran 2.506, .782, 6.835 wing at 7 and bindings at 29 3/8 for 18 months. 35 was a lock, 38 about a 1/3 of the time. good luck. heck i'm going to try dirts numbers.
  • wtrskiorwtrskior Posts: 704 Crazy Baller
    edited October 2013

    Stock for a 66.5 is basically:
    8 wing
    29.5 boots

    All +/- .005 but I would stay within that range. I Have a few years on the syndicate skis and none have responded that well to big swings in fin movement.

    I am at 29 5/8 to 3/4 with my front boot, also couldn't go more than .5 a degree on the wing without the shi acting erratically. I am not an expert skier, into -35 at 34.2.

    Hope this helps
  • GlydonGlydon Posts: 230 Baller
    Resurrecting an old post in hopes of getting some numbers for 65.5 ... TIA
  • KillerKiller Posts: 415 ★★★★Quad Panda Award Recipient ★★★★

    Will Asher’s Recommended Syndicate A2 Fin Settings:

    Length: 6.845 (Tips)
    Depth: 2.505
    Distance from Tail: 0.780
    Wing Angle: 8°

    Recommended Syndicate A2 Boot Locations per Size:
    (*Note- Center hole boot location on all HO boots equals Recommended Boot Location)

    64.5” A2: 28.5”
    65.5” A2: 29”
    66.5” A2: 29.5”
    67.5” A2: 30”
  • GlydonGlydon Posts: 230 Baller
    @Killer Will's settings work for 65.5 just change boot location ? @savaiusini any old advice ? Was Greg on a 65.5 ?
  • KillerKiller Posts: 415 ★★★★Quad Panda Award Recipient ★★★★
    edited July 2018
    @Glydon have you tried those numbers? Those are very standard fin numbers you could put on many skis and thy will work just fine, fine tune from there for your skiing.

    I skied the A2 for a few years in 66.5, excellent ski but found those numbers perfect. Couldn’t deviate much from factory. I went a littler further back with my boots.

    Just googled it and you posted the same thread a few years back. These numbers look weird for a 65: Try both and report back
  • GlydonGlydon Posts: 230 Baller
    Thanks @Killer will do. I had lost that document on my cell phone when it went to bottom of river ... will let you know.
Sign In or Register to comment.